Boat Kolibri KM-360 DSL grey, aluminum floor

PRODUCER Kolibri boats
PRODUCT CODE: KO-5093310

PRICE WITH VAT

€ 1380,00
€ 1219,00

SAVE_ACTION_NUMBER	11.67 %
AVAILABILITY:	n/a

PRODUCT DESCRIPTION -

Boat Kolibri KM-360 DSL grey, aluminum floor

The KOLIBRI KM-360DSL inflatable motorboat has improved seaworthiness and an enlarged cockpit compared to traditional boats of similar size with conical rear tubes. Sliding seats, adjustable oar clamp, anchor guide pulley, monolithic rear end are the basic features of the "KOLIBRI" KM-360DSL.

A series of professional motorboats, designed mainly for motor sailing. The floor of the boats is a solid folding one made of aluminum parts reinforced with side and transverse aluminum slats. Under the floor there is an inflatable keel shaping the bottom, for better guidance and control when sailing in a slipway. The design allows for heavy loads and installation of powerful engines. The boat is transported in two bags, separately the boat and separately the floor. The material used for production is 5-layer PVC with a density of 1100g/m2.

Technical parameters:

• Total length: 360 cm

• Total width: 160 cm

• Tube diameter: 42 cm

• Weight of the packed boat: 63 kg

• Number of people: 5

• Load capacity (max.): 650 kg

• Engine max: 20 HP

• Material: PVC 1100g/m2

• Floor type: fixed folding

• Number of benches: 2

The basic equipment includes 2 benches, 2 oars, an inflatable foot pump, 2 transport bags, a repair kit, and operating instructions.

The reinforced aluminum floor is made of parts that are connected by aluminum profiles. The individual parts of the floor are made of aluminum, which has an anti-slip finish. The tip of the floor (part number 1) is also made of waterproof plywood in the aluminum version. To remove the floor from the boat, it is necessary to disassemble the floor into individual parts, which can then be packed in the bag in which the floor is delivered to the boat.

Reinforced floors are only used on boats that have an inflatable keel. In the attached picture you can see the hole in which the valve for inflating the keel of the boat is located after the floor is inserted. The advantage of this type of floor is its strength, thanks to which you can use the entire inner surface of the boat bottom.